Description
Ecocoat Arcane is a professional single-layer ceramic coating reinforced with IGL’s Graphene Infinite technology. It is designed to provide durable chemical, environmental, and water-spot resistance while producing a slick, easy-to-maintain surface.
IGL publishes up to 4 years of durability, 9H hardness, a 105-degree contact angle, an 18-degree slide angle, and an 8.7-degree slip result. The coating may be installed indoors or outdoors under controlled, stable conditions.
Key Features:
- Graphene Infinite – Uses IGL’s low-carbon graphene reinforcement technology.
- Single-Layer System – Delivers the published protection in one properly installed layer.
- Up to 4 Years – Provides long-term protection when prepared, applied, and maintained correctly.
- 9H Hardness – Adds a hard, durable sacrificial surface over compatible finishes.
- Fast Water Readiness – Can be water-safe after approximately 2 hours under suitable conditions.
- Finish Versatility – Compatible with matte or gloss paint, PPF, and vinyl.
Areas of Application:
- Automotive paint and clear coat
- Matte and gloss finishes
- Compatible paint-protection film and vinyl
- Professional indoor or controlled outdoor installation
How to Use:
- Wash, chemically and mechanically decontaminate, and correct the finish as required.
- Use Ecoclean Precoat to remove polishing oils and leave a residue-free surface.
- Apply one thin, even layer to a small section using an appropriate coating applicator.
- Level and buff the coating within the timing specified by the current TDS; do not allow high spots to cure.
- Keep the vehicle dry for at least about 2 hours and follow the full cure and maintenance guidance in the current TDS.
Reviews
There are no reviews yet.