Ecocoat EZ

Description

Ecocoat EZ is a user-friendly, single-layer protective coating based on cyclosilazane chemistry and IGL’s Graphene Infinite reinforcement. It is designed to add slickness, hydrophobicity, and chemical resistance without a complex multi-layer installation.

IGL publishes up to 12 months of protection and broad compatibility with paint, plastics, rubber, wheels, calipers, headlights, PPF, and vinyl.

Key Features:

• Graphene Reinforced – Uses Graphene Infinite technology for durable surface protection.
  
• One-Layer Application – Applies and levels in a simple wipe-on, wipe-off process.
  
• Up to 12 Months – Provides year-long protection when installed and maintained correctly.
  
• Low VOC – Reduces solvent emissions compared with many traditional coatings.
  
• One-Hour Readiness – Can be ready after approximately 1 hour under suitable conditions.
  
• Multi-Surface – Suitable for paint, plastics, rubber, wheels, calipers, lights, PPF, and vinyl.

Areas of Application:

• Automotive paint and clear coat
  
• Exterior plastics and rubber
  
• Wheels and brake calipers
  
• Headlights
  
• Compatible PPF and vinyl

How to Use:

1. Wash, decontaminate, and polish the vehicle as needed.
   
2. Prepare each surface with Ecoclean Precoat and ensure it is cool and completely dry.
   
3. Apply a thin, even amount to a small section with a suitable applicator.
   
4. Immediately level and wipe off the residue with clean microfiber towels.
   
5. Apply only one layer, keep the surface dry, and allow about 1 hour of initial curing before exposure.

Additional information