Ecocoat Kenzo K1 – No Graphene

Description

Ecocoat Kenzo K1 is the base layer in the current Ecocoat Kenzo Graphene Reinforced system. The official product page presents Kenzo as a two-component kit containing a 20 ml Base and a 20 ml Top coating.

K1 is not the final standalone layer. It prepares the protected surface for the K2 top component and contributes to the complete system’s 10H hardness, gloss, chemical resistance, and published durability of up to 5 years.

Key Features:

• Base Component – Forms the first layer of the Kenzo Base-and-Top system.
  
• Graphene Infinite – Part of IGL’s graphene-reinforced professional coating technology.
  
• 100% Active System – The complete Kenzo system is published as a high-solids coating.
  
• 10H System Hardness – The finished Base-and-Top system delivers published 10H hardness.
  
• Up to 5 Years – Complete Kenzo installation provides long-term protection when properly maintained.
  
• Professional Only – Installation is restricted to trained or certified applicators.

Areas of Application:

• Automotive paint and clear coat
  
• Matte and gloss finishes
  
• Compatible PPF and vinyl
  
• Use only as the K1 base layer within the complete Kenzo system

How to Use:

1. Complete the full correction and decontamination process required by the Kenzo TDS.
   
2. Wipe all surfaces with Ecoclean Precoat and inspect under suitable lighting.
   
3. A certified installer applies K1 in thin, even sections using the official timing and leveling method.
   
4. Remove every high spot and allow the exact intercoat period stated in the current Kenzo TDS.
   
5. Apply K2 as the required top component, then follow the complete cure and aftercare schedule.

Additional information