High-efficiency concentrate of the spray-on, rinse-off Hydrocoat booster.
Dilutes 1:30 with distilled water; one 500 ml bottle makes up to about 15 L ready to use.
Uses octyl-functional silane in a water-borne, VOC-compliant carrier.
Creates instant hydrophobicity on paint, glass, plastics, PPF, rubber, wheels, and metal.
Description
Ecoshine Hydrocoat Concentrate is the concentrated version of IGL’s rinse-off hydrophobic booster. The formula is diluted 1:30 with distilled or RO/DI water, then used like the ready-to-use Hydrocoat on a clean, wet surface.
IGL describes the concentrate as up to 30 times more cost-efficient. A 500 ml bottle can make approximately 15 L of ready-to-use product.
Key Features:
1:30 Dilution – Mix one part concentrate with 30 parts distilled or RO/DI water.
High Yield – A 500 ml bottle makes up to approximately 15 L ready to use.
Instant Hydrophobicity – Creates immediate water beading with high gloss.
Rinse-Off Application – No wiping or scrubbing is required after spraying.
Ceramic-Coating Safe – Compatible with existing coatings.
Biodegradable Ingredients – Uses an environmentally considerate formulation.
Areas of Application:
Paint and clear coat
Glass and mirrors
Plastic, PPF, vinyl, and rubber trim
Wheels and metal
Compatible ceramic-coated exterior surfaces
How to Use:
Prepare ready-to-use solution at 1:30 using distilled or RO/DI water; for 1 L total, use about 32 ml concentrate and 968 ml water.
Wash the surface with Ecoclean Wash or Blizzard and leave it clean, cool, and wet.
Shake the diluted product and spray a light, even amount onto one wet section.
Immediately rinse with a large amount of water, preferably with a pressurized spray, to activate and remove excess.
Dry as usual and never allow the product to dry on the panel.
