Description
Ecoshine F2, currently listed as Ecoshine Polish F2, is a medium-cut diminishing-abrasive polish for correcting swirls, sanding marks, and paint defects while leaving a refined finish. It is positioned between heavy correction and final finishing.
IGL publishes an 8/10 cut and 8/10 finish and recommends compatible medium-hard foam pads for rotary or dual-action use.
Key Features:
- Balanced Cut and Finish – Published at 8/10 cutting power and 8/10 finishing quality.
- Diminishing Abrasive – Abrasives refine as the polish is worked.
- P2000 to P3000 Removal – Corrects moderate sanding marks on compatible finishes.
- Low Dust – Reduces cleanup and residue during polishing.
- Long Working Time – Supports controlled correction over several passes.
- Machine Versatility – Suitable for rotary and dual-action polishers.
Areas of Application:
- Automotive paint and clear coat
- Polycarbonate headlights
- Moderate swirls, haze, and P2000 to P3000 sanding marks
- Rotary and dual-action machine polishing
How to Use:
- Wash, decontaminate, and inspect the surface; mask sensitive edges and trim.
- Use a clean medium-hard pad such as the compatible orange or yellow IGL foam pad.
- Add a small amount of polish and spread at low speed.
- Polish in controlled crosshatch passes; the official page lists approximately 800 to 1500 RPM for rotary use.
- Avoid overheating, wipe the residue, inspect under good lighting, and repeat or finish with F3 if needed.
