Ecocoat Premier 500ml

Description

Ecocoat Premier is a water-based spray sealant for adding hydrophobicity, oleophobicity, gloss, and slickness to clean non-absorbent surfaces. It can be used as stand-alone protection or as a maintenance topper for an existing IGL coating.

IGL publishes up to 6 months of durability, 10% active content, and a contact angle above 105 degrees.

Key Features:

• Water-Based Formula – Provides easy application with reduced solvent content.
  
• Up to 6 Months – Adds medium-term protection when applied and maintained correctly.
  
• Greater Than 105-Degree Contact Angle – Produces strong water beading.
  
• High Gloss and Slickness – Improves shine and surface feel.
  
• Coating Compatible – Can maintain and refresh existing IGL ceramic coatings.
  
• Self-Cleaning Effect – Helps dirt and water release more easily.

Areas of Application:

• Automotive paint and clear coat
  
• Existing IGL ceramic coatings
  
• Glass, trim, wheels, and other compatible non-absorbent surfaces
  
• Do not use on absorbent materials unless specifically approved

How to Use:

1. Wash the surface thoroughly and ensure it is cool and free from residue.
   
2. Spray a small amount onto a clean microfiber towel or suitable applicator.
   
3. Spread a thin, even film over a manageable section.
   
4. Buff immediately with a second clean, dry microfiber towel until clear and streak-free.
   
5. Allow the product to cure and keep it dry according to the current label before exposure.

Additional information